Setting the speaker
switch (sPeEAKER)
You may switch off the projection TV speakers when,
for example, you want to listen to the sound through a
stereo system.
If you connect an amplifier with Dolby Pro Logic
decoder to the CENTER SPEAKER IN terminals, you
can use the projection TV speakers as center speaker.
After making the connection 'page 15), set SPEAKER
to CENTER.
If you connect the Sony SAV A series speaker system to
the AUDIO (VAR/FIX) OUT connectors, you can take
advantage of the speakers' surround sound and super
woofer mode. After making the connections (page 16),
set SPEAKER to SAVA SP, then adjust SURROUND
MODE or SUPER WOOFER MODE.
,
1 Press MENU.
2 Press ¢ or ¥ to select -, and press —.
3 Press ¢ or # to select SPEAKER, and press
4
press ¢ or # to select ON, OFF, CENTER or
SAVA SP, and press — .
:
@ |AUDIO
© | uts
STEREO
fem PSPEAKER SAVA SP
{etal}
SURROUND MODE
a
WOOFER MODE
Pi
NU
Use J
ea
Exit
5 Press MENU to return to the original screen.
Choose
To
ON
Listen to the sound from the
projection TV.
OFF
Turn off the projection TV speaker
sound and listen to the projection
TV's sound solely through the audio
system speakers.
CENTER
Use the projection TV center speakers
as the center speaker in another
surround audio system.
SAVA SP
Turn off the projection TV speaker
sound and listen to the projection
TV's sound through the Sony SAVA
series speaker system. You can adjust
volume, muting, surround modes,
and super woofer mode with the
remote control supplied with the
projection TV.
a
a
a
ee
aS
To select surround sound or super
woofer mode of the SAVA speaker
system
After setting SPEAKER to SAVA SP, follow the
procedure below.
Press # or + to select SURROUND MODE or
SUPER WOOFER MODE, and press ©).
For details on each option, refer to the operating
instructions of the speaker system.
2
|® | urs:
STEREO
[S| SPEAKER : SAVA SP
SURROUND MODE
Note
¢ This feature is only for Sony SAVA speaker system with an
operation capability for KP-48V75, KP-53V75, KP-53V75C. and
KP-61V75.
:
Operations
| 35-EN