Sleep.8 TRENTON Manual Del Usuario página 4

EN
Prior assembly:
1. Check the external appearance and integrity of parts in the packaging. Claims on damage are
accepted only for the products WITHOUT signs of assembly.
2. Keep the packaging until assembly completion! If during the assembly process any defects and
missing items are detected, it is required to keep the packaging until the trading company's
representative arrives at your location.
3. Check the quantity of parts and fittings according to the parts list, arrange the fittings into
groups. The manufacturing company reserves the right to make design changes in the product, to
replace the fittings and hardware with the similar ones that do not compromise the external
appearance and do not affect the functional properties of the product.
4. Follow the assembly procedure specified in this instruction! Failure to follow the assembly and
operating instructions will void the manufacturer's warranty liabilities. The assembly and
operating instructions shall be kept for the entire service life of the product.
5. Transfer all parts carefully, jerk-free, place them securely, avoid dropping or knocking them! The
product shall be assembled on a flat surface.
6. Close all unused fabrication holes and fittings with plugs.
7. Move furniture and its parts by lifting them only slightly above the oor. This will help to avoid
deformations and breakages.
In order to assembly, the user will need:
Philips screwdriver