Klarstein ARIA SMART Manual Del Usuario página 71

If you start the device without setting the timer, the timer will start counting up.
Touch the timer button while working, the timer will start counting down and the
device will turn off when the auto power off time is reached.
Example:
You have turned on the device and the timer counted up 15 seconds. When
the timer reaches 15 seconds and you touch the timer button, the timer starts
counting down from 15 seconds to 0. When the timer reaches 0, the device turns
off, displays [End] and beeps. To clear the word [End] from the display, press the
Start/Pause button.
Adjust speed
To set the desired speed, touch the speed button
The speed digit flashes.
Note: You have approximately 5 seconds to set the desired speed before the
display returns to normal. Within 5 seconds, turn the function knob to set the
desired speed.
Important notes on setting the speed:
• Some of the preset programs lock the speed so you cannot adjust them while
running.
• The speed range is from level 1 to 10 (10 is the highest speed).
• When the device is in mixing and heating mode and the temperature is above
90°C, the maximum speed that can be selected is 1 to 4.
• If the device is in operation or set to a higher speed (5 to 10) and the
temperature reaches 91°C or more, the speed will automatically be reduced to
speed 4.
• When using the machine at speed 8, 9 or 10, do not run it for more than 2
minutes at a time without a 5 minute cool-down period in between.
at the bottom of the display.
EN
71