Publicidad
Idiomas disponibles
Idiomas disponibles
Note: You have approximately 5 seconds to set the desired heat level before the
display returns to normal. Within 5 seconds, turn the function knob to set the
desired heat level.
Important notes on setting the heating output:
•
Some of the preset programs lock the heat level so you cannot adjust them
while they are running.
•
When you set the heating level, the temperature display will show 100 °C by
default.
•
You must select a setting from 1 to 10 for the heating function to work. If you
leave the setting at 0, it will not be activated.
Turbo function
To set the turbo function, press and hold the turbo function
function starts the device at the highest speed. If you release the button for the
turbo function, the device stops immediately.
Note: This function is only active for a maximum of 1 minute at a time. Make
sure you have the correct ingredients and accessories for full speed use before
using this feature. Otherwise, the product will be damaged.
Scale function
This thermal cooker has a built-in scale and can weigh from 1-4,999 grams in
1-gram increments.
Note: The scale function only works if the lid of the blender jug is not on
the blender jug. Otherwise the button for the scale function
displayed.
In order to use the scale function, the device must be paused or in standby mode.
•
Touch the scale button to activate the scale function.
•
The timer digits will disappear and the scale digits will appear approximately
5 seconds later, flashing [0 00 0] to indicate the scale function has been
activated.
•
The ingredients are weighed as they are added to the jar and the display
shows the value in grams.
button. This
will not be
EN
73
Publicidad
