Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Accessories
This product include:
Straight arm X 1
Offset arm X 1
Dust extraction port X 1
Sanding belt 80/120/240 grit
Maintenance
Your STANLEY FATMAX corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com.
Technical data
Voltage
V
DC
No-load speed
min
-1
Weight
kg
12
(Original instructions)
SFMCE210 Type 1
1204m/min
Charger
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
Battery
SFMCB201
Voltage
V
DC
Capacity
Ah
Type
Level of sound pressure according to EN62841:
Sound pressure (L
) 73 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 81 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
Vibration emission value a
Declaration of Conformity
The Supply of Machinery (Safety) Regulations 2008
Belt Sander Powerfile - SFMCE210
Stanley Europe declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN 62841-1:2015 + AC:2015 +A11:2022;
EN 62841-2-4:2014 + AC:2015;;.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Stanley Europe at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of Stanley Europe
18V
1.15
SFMCB11
SFMCB12
230
230
18
18
1.25
2
SFMCB202
SFMCB204
18
18
18
1.5
2.0
4.0
Li-Ion
Li-Ion
Li-Ion
<2.5 m/s
K = 1,5 m/s2
2
h
2008/1597 (as amended).
2012/3032 (as amended).
Director – Consumer Power Tools
Stanley Europe, 270 Bath Road, Slough,
Berkshire, SL1 4DX
SFMCB14
230
18
4
SFMCB206
18
6.0
Li-Ion
Karl Evans
United Kingdom
05/06/2023
Publicidad
