Publicidad
Idiomas disponibles
Idiomas disponibles
Routine Maintenance
EN
3. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush, a finger or sharp objects to prevent
damage.
4. Rinse the dust bin and filter with water and dry them completely
before reinstalling.
Note:
· Rinse the dust bin and filter with clean water only. Do not use any detergent.
· Use the dust bin and filter only when they are completely dry.
14
Clean the Mopping Module
1. Slide the two release clips on the side of water tank to remove
the mopping module, and then pull the mop pad off the mopping
module.
12
11
1
10
2
24 hrs
9
3
8
4
2. Pour out the water in the tank. Clean with water only and leave
7
5
6
to air dry before re-installing.
Note: Do not expose the tank to the sun directly.
Publicidad
