Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your Basketball Game. We recommend
that two adults work together to assembly this basketball game.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown
on the parts identifier below. Carefully cut or tear the four corners of the box so that the
bottom of the box can be used as your work surface.
FIG. 1
3. Connect the U-tube (#1) to L Base tubes (#8) by sliding them together and locking in the
place as shown in FIG.1 and 1A.
Ae
Lock
Detail A
FIG. 2
4. Connect Side Braces (#6) to Back-Upright Tubes-A (#9) by using one Bolt (#21) and one
Washer (#24) per side as shown in FIG.2.
a
FIG. 3
5. Connect one Support Tube-B (#8) to the tube assembly (#6 and #9) by using two Bolts (#21),
two Washers (#24) and two Locknuts (#26) per side as shown in FIG.3
Note: Make sure all the Bolts (#21) go from the outside toward the center.
Publicidad
