Publicidad
Idiomas disponibles
Idiomas disponibles
Note: Before carrying ot any setting procedures, ensure that the keypa
is indeed unlocked .
11.2 Power on / Standby mode
Power on feature
Press the
button to put the device in operation, in Auto mode .
beep
beep
Help for the visually impaired: sound signals
The device makes 2 short beeps to notify that it is in operation, in Auto
mode .
This function allows you to stop the heating in summer, for example .
Press the
button to put the device in standby mode .
beep
Help for the visually impaired: sound signals
The device makes 1 short beep to notify that it is in standby mode .
11.3 Selecting the operation mode
The
button allows you to adapt the operating schedule of your device
to your needs, depending on the season, whether your home is occupied or
not . By pressing the
button once or several times, select the required
mode .
Mode sequence:
→
Auto
Comfort
Mode overview:
•
Auto mode
In Automatic Mode, the device will automatically change from Comfort
mode to Eco mode according to the established programme .
3 different cases depending on your set-up:
Cod . 1910000000276 - nv04
→
→
Frost
Eco
protection
3
7 day and daily programme
Your device has been programmed and is executing Comfort and Eco
mode orders in line with the settings and time periods you have selected
(see "7 day and daily programme integrated" chapter) .
Without programme
if the 7 day and daily programme is not enabled or no orders are being
sent by pilot wire, then your device's factory setting mean that it will
operate in non-stop Comfort mode, 7 days of the week .
• Comfort mode
Non-stop Comfort mode . The device will operate 24 hours a day to
achieve the temprature which has been set (e .g . 19°C) . The Comfort
mode temperature level can be set by the user .
•
Eco mode
Eco, which means the Comfort Modetemperature minus 3 .5°C . This
enables you to lower the temprature without having to reset the Comfort
Mode temperature . Select this mode for short-term absences (between 2
and 24h) or during the night
•
Frost protection mode
This mode enables you to protect your home against the effects of
cold weather (frozen, pipes, etc.), by maintaining a minimum tem-
perature of 7*C in it at all times. Select this mode when you will be
away from your home for a long time (more than 5 days).
11.4 Boost feature
Important: the Boost mode can be enabled at any time, whatever the
current operating mode (Auto, Comfort, Eco or Frost protection)
To activate Boost mode, press
be set at maximum for the time period you request . 60 minutes display
will flash by default .
First press: Boost
Durante il primo minuto: appaiono il simbolo boost e l'indicatore di
riscaldamento, il cronometro della durata lampeggia .
During the first minute, you can modify the Boost duration from 0 to the
- 27 -
English
the desired temperature setting will
Publicidad
