Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Using the blender
WARNING!
•
Always ensure the lid is correctly installed when using the blender.
•
Only remove the lid once the blades have come to a complete stop.
•
We recommend waiting for the ingredients to cool before blending them. If
you do decide to mix hot liquids, be careful when removing the lid or blender
jug as the steam may burn you.
Remove the blender jug connector cap by turning it to the UNLOCK position, then lifting it up.
Place the blender jug on the corresponding connector, whilst making sure to align
the arrow on the base of the jug with the unlock
Next, turn it towards the "lock"
•
Place the ingredients in the blender.
NOTE: Do not fill the jug above the maximum 1.5 L mark.
Reposition the filler cap on the lid of the blender jug. Make sure that the notches on
both the filler cap and lid are aligned.
Firmly push the filler cap onto the lid and turn it clockwise until it clicks into place.
(To remove the filler cap, unscrew it by turning it anticlockwise until the notches are
aligned; then lift up the filler cap.)
•
Place the lid on the blender jug and press firmly so that the blender jug is firmly closed.
•
Set the speed control knob to 0. Plug the unit into a mains socket.
NOTE: Plug the power plug into the mains socket, then use the pulse function
first (by setting the speed control knob to P) to check whether or not the bowl
has been correctly installed.
•
To start blending, turn the speed control knob to the desired position (either P for pulse
or 1-6 for the desired speed).
•
To switch off the unit, turn the speed control knob to 0.
symbol.
symbol, until it clicks into place.
26
EN
Publicidad
