Maytag MGC6430 Manual De Instrucciones página 7

Be sure appliance is aft and oil
parts ore cool before handling ar
cleaning. This is to avoid damage
and possible bu ms.
> To prevem s_aLnLng or a_sco_oration.
c_ean applianceattar eac_ use.
It a part is removea, be sure it is
correcIlyreplacea,
BURNER CAPS AND SEALED
GAS BURNERS
RemovableBurner Cops
| Allowburnerto coot.Removeburnercap
and wash in soapy water with a plastic
scouringpad. For stubborn soils, clean
with a soap-flied, nonabrasivepad or
Cooktop Cleaning Creme (Part
#20000001)** a nd a sponge.
| Do notclean in dishwasheror self-clean-
ing oven.
Sealed Gas Burner
| Clean frequently. Allow burner to cool.
Cleanwithsoapandplasticscouringpad.
Forstubborn soils,cleanwitha soap-filled,
nonabrasive pad.
| Be carefulnot to getwater intothecenter
of the burner.
| Use carewhencleaningthe ignitor.If the
ignitor is wet or damaged the surface
burnerwill notlight.
| Toensureevencooking performance, keep
burnerportsfree of foodsoils/debris.
BURNER GRATES °PORCELAIN
ON CAST IRON
| Washgrateswith warm,soapywaterand
a nonabrasive, plasticscrubbing pad. For
stubborn soils, clean with a soap-filled,
nonabrasivepad or Cooktop Cleaning
Creme(Part#20000001)** a nda sponge.
If soilremains,reapplyCooktopCleaning
Creme,cover with a damp paper towel
and soak for 30 minutes.Scrub again,
rinseand dry.
Donot cleanin dishwasheror self-clean-
ing oven.
CONTROL KNOBS
| Removeknobs in the OFF position by
pulling up.
| Wash,rinseand dry.Do notuseabrasive
cleaningagentsas they may scratchthe
finish.
| Turnon eachburnerto be surethe knobs
havebeencorrectlyreplaced.
DRIP BOWLS- PORCELAIN
Porcelainmaydiscolororcrazeifoverheated.
This is normal and will not affect cooking
performance.
> When cool, wash after each use, rinse
and dryto preventstaining or discolora-
tion. May be washed in the dishwasher.
> To dean heavy soil, soak in hot sudsy
water,then use a mild abrasivecleaner
such as Soft Scrub*and a plasticscour-
ing pad.
> Forbumedonsoil, removefromcooktop,
placeon newspapers andcarefullyspray
with commercial oven cleaner. (Do not
spray surrounding surfaces.) Place in
plastic bag and allow to soak several
hours. Wearing rubber gloves, remove
from bag,wash, rinseand dry.
GLASS
° SURFACE
> Clean after each use.
> Allow surfaceto cool.
> Avoidusingexcessiveamountsof water
which may seep under or behind glass
causing staining.
> Wash with soap and water. Rinse with
clear water and dr}'. Glass cleanercan
be used if sprayedon a cloth first.
> Do not use abrasive materialssuch as
scouring pads, steel wool or powdered
cleanersas they will scratchglass.
SURFACE BURNER FAILS TO LIGHT.
| Checkto be sureplug is securelyinserted
into receptacle,
| Checkor re-setcircuit breaker, Checkor
replacefuse,
| Checkpowersupply,
| Checkto be sure burner is correctlyrated
foryour kindof gas,
| Checkto be sure burner ports or ignition
ports are not clogged,
| Checkto besureignitorisdryand clicking,
Burnerwill not light if ignitor is damaged,
soiledor wet, If ignitor doesn't click, turn
control knobOFF,
| Checkto be sure burner cap is correctly
seatedon the burner base,
SURFACE BURNER FLAME LIFTS
t Checkto be sure a pan is sitting on the
grateabove.
| Contactan authorizedMaytagservicer.
THE FLAMEms UNEVEN.
t Burnerports may be clogged.
| Flame may needto be adjusted.Contact
an authorizedMaytagservicer.
SURFACEBURNERFLAME IS
YELLOW IN COLOR.
| Contactan authorizedMaytagservicer,
t Someyellow tips on the flameare accept-
able when usingLP gas.
* Brand namesare registeredtrademarksof the respectivemanufacturers.
** To order call 1-800-688-8408.