5. Once the adaptor is installed, turn handles and into the locked position. This may require adjusting the
T-bolts for a looser or tighter fit.
Handles and T-Bolts are shown
in the Locked Position
Small pucks are to the front.
Large pucks are to the rear.
REAR OF TRUCK
6. Once the Ram adaptor is installed, make sure the Adaptor Rails sit FLAT on the Ram 5
"pucks" at ALL 4 contact locations.
Handles and T-Bolts
are shown in the
Locked Position
Wheel "pucks"
th
Ram 5
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2020 Keystone Automotive Operations Inc. All Rights Reserved. 08/07/2020-Rev2
Front Rail Adaptor (6)
Area to be flat
Ram Truck bed NOT shown for
clarification purposes
Rear Rail Adaptor (7)
Area to be flat
th
Wheel
REAR OF TRUCK
Wheel "pucks"
th
Ram 5
Page-6