Philips NORELCO S5000 Manual Del Usuario página 19

4 Switch off the appliance and clean the
attachment after use.
Using the nose/ear trimmer attachment
You can use the nose/ear trimmer attachment to
trim your nose and/or ear hair.
Trimming nose hair
Make sure both the nose/ear trimmer
attachment and nasal passages are clean before
trimming.
1 Twist the shaving head or other attachment to
remove it from the handle and press the
nose/ear hair trimmer onto the handle.
2 Switch on the appliance.
3 Carefully insert the trimming head into one of
your nostrils.
Do not insert the attachment more than
0.5 cm into your nostrils.
4 Slowly move the trimming head around inside
each nostril, making sure the side of the tip is
held firmly against the skin. This reduces the
tickling effect that can occur.
5 Switch off the appliance and clean the
attachment after use.
Dried nasal mucus can block the cutting element,
preventing the appliance from switching on. If
the cutting element is blocked, clean the
attachment.
Trimming ear hair
Make sure your outer ear channels are clean and
free from wax.
19
English