Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTMENT GUIDE
ADJUSTING THE LEVEL
If the recumbent bike is not level, turn the dials on
the Rear End Caps (No. 56L/R) to adjust. Turn
counter-clockwise to raise and turn clockwise to
lower.
ADJUSTING THE SEAT
To move the Seat (No. 52) forward or backward,
while seated on the recumbent bike, put your feet
on the floor. Shift the Adjustable Handle (No. 13)
down to loosen. Adjust the Seat (No. 52) to your
desired position, then shift the Adjustable Handle
(No. 13) up to secure.
ADJUSTING THE HANDLEBAR
To adjust the Handlebars (No. 5L/R) in different
directions and length, loosen and pull the Knobs
(No. 67) outward, then slide the Handlebars (No.
5L/R) to the desired direction or length position.
Once positioned, re-insert and tighten the Knobs
(No. 67) to secure the Handlebars (No. 5L/R) in
place.
PEDAL ADJUSTMENT
The pedal strap is adjustable and can be
personalized to fit the user's foot size.
MOVING THE RECUMBENT BIKE
There are transportation wheels located on the
Front End Caps (No. 55L/R). Hold the handlebar
on the Rear Stabilizer (No. 11) and pull forward to
lift the rear of the recumbent bike off the floor. Now
you can move the recumbent bike.
19
Publicidad
