Operation (continued)
4
Adjusting the SENS switch
To increase the detection zone, slide the
"SENS" switch toward the "H" (high) position.
To decrease the detection zone, slide the
"SENS" switch toward the "L" (low) position.
NOTE: The motion sensor is more sensitive to motion
moving across the front of the sensor. The motion sensor
is less sensitive to motion moving directly toward the front
of the sensor.
5
Adjusting the light timer
NOTE: The light timer controls the amount of time the
light will stay on full bright after all motion has stopped.
The timer is adjustable from 5 seconds to 1 minute.
Slide the control switch to the "AUTO" position.
To increase the time, turn the dial toward the
"1 MIN" position.
To decrease the time, turn the dial toward the
"5 S" position.
6
Using the OFF control
Slide the control switch to the "OFF" position
to turn the light off and to conserve the
battery life.
Care and Cleaning
Periodically clean the solar panel with a soft cloth and warm water. Do not hose spray. Keep the panel clear of
snow and leaves. Make sure trees and other objects do not block sunlight from the panel.
If not to be used for several weeks, turn the unit OFF. Store it with the panel connected and where the panel
can gather sunlight.
NOTE: The higher the "SENS" setting (sensitivity), the
greater the possibility of false triggering. To reduce false
triggering, slide the "SENS" switch toward the "L" (low)
setting.
OFF TEST AUTO
L
M
H
SENS
OFF TEST AUTO
L
C
OFF TEST AUTO
L
M
H
SENS
10
OFF TEST AUTO
C
OFF TEST AUTO
M
H
L
M
H
SENS
SENS
L
M
H
SENS
OFF TEST AUTO
L
M
H
SENS
OFF TEST AUTO
L
M
H
SENS