Publicidad
Idiomas disponibles
Idiomas disponibles
Pre-Installation
PLANNING INSTALLATION
Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this
Estimated installation time: 30 minutes
INITIAL BATTERY CHARGE
IMPORTANT: The solar panel requires full, direct sunlight to charge the battery. Clouds, rain, snow, and other weather conditions may not allow the
solar panel to completely recharge the battery. Other obstructions such as buildings or trees may block the sun as well.
When installing the solar panel, make sure it is aimed as described below with a minimum amount of obstructions. If possible, mount the panel facing
toward the southern sky.
PRIOR TO USE, the battery will require 3 to 7 days of full sun to completely charge with the control dial in the
OFF position or at least 10 hours of charging using the 5V2A USB charger.
MOUNTING LOCATION
The most important thing to remember for the operation of your solar powered motion sensing light is that it works
from the power received from direct sunlight. The more direct sunlight the solar panel receives in a day, the longer
the light will operate.
SOLAR LIGHT FIXTURE
The main unit contains the LEDs, motion sensor, and battery. When deciding where to mount this unit, keep in mind
about 180° detection angle at a surrounding air temperature of 77° F (25 °C).
SOLAR PANEL
The solar panel requires direct sunlight falling onto the face of the solar panel for as long as possible over the
course of the day.
When choosing the location for the solar panel, make sure it is aimed toward the south and is tilted to a suitable
angle to allow as much direct sunlight to fall upon it as possible. Make sure there is a minimum amount of
obstructions between the solar panel and the sun.
connect.
3
Please contact 1-866-308-3976 for further assistance.
Hardware Included and
HOMEDEPOT.COM
Publicidad
