Kodak EasyShare 3 Serie Guia Del Usuario página 7

qB>
Specifications and notes
Specifications:
Communication with USB (cable included with
computer/printer: Kodak EasyShare camera
dock, series 3)
DC Voltaqe Input: 5 V DC at 2.0 Amps
AC Voltage: 110 V to 240 V 50/60 Hz
Notes: * When the camera is on the dock it is
powered by the dock instead of the camera
batteries.
• Battery check (1 green charging light) may
take up to 10 minutes. See page 3.
• Your AC adapter may have additional plugs.
Use the one appropriate for your locality.
• Dispose of batteries according to local and
national regulations.
Troubleshooting
Cannot transfer pictures to
the computer
Software is not installed or is
installed incorrectly.
(WindowsOS-basedonly)
DisconnectUSBcable and
remove cdm@l-8
from
dock,
Camera was docked and
listed as an unknown device
(Windows OS-based only).
software. To uninstall, go to
Sta4 > Settings > Control
Panel > Add/Remove
Programs.
Disconnect USB cable and
remove camera frorn dock.
Delete camera from Device
Manager: Right-click on My
Computer, go to Properties >
Hardware > Device Manager >
Other Devices.