STEINEL DALI64 KNX-S Manual De Instrucciones página 17

DALI Gateway DALI64 KNX-S, DALI Gateway DALI128 KNX-S
1 Safety instructions
Electrical devices may be mounted and connected only by electrically skilled
persons.
Serious injuries, fire or property damage are possible. Please read and follow the
manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device
or load. In so doing, take all the circuit breakers into account, which support danger-
ous voltages to the device and or load.
DALI is an FELV (functional extra-low voltage). On installing, ensure safe isolation
between KNX and DALI and mains voltage. A minimum distance of at least 4 mm
must be maintained between bus conductors and DALI/mains voltage cores.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Function
System information
This device is a product of the KNX system and complies with the KNX directives.
Detailed technical knowledge obtained in KNX training courses is a prerequisite to
proper understanding.
The function of this device depends upon the software. Detailed information on load-
able software and attainable functionality as well as the software itself can be ob-
tained from the manufacturer´s product database.
The device can be updated. Firmware can be easily updated with the STEINEL KNX
Service App (additional software).
The device is KNX Data Secure capable. KNX Data Secure offers protection against
manipulation in building automation and can be configured in the ETS project. De-
tailed technical knowledge is required. A device certificate, which is attached to the
device, is required for safe commissioning. During mounting, the device certificate
must be removed from the device and stored securely.
Planning, installation and commissioning of the device are carried out with the aid of
the ETS, version 5.7.7 and higher or 6.1.0.
Intended use
– Controlling of luminaires and other applications with DALI operating device in
KNX installations, e.g. electronic ballast
– Mounting on DIN rail according to EN 60715 in distribution boxes
Product characteristics
– DALI-2 certified
– Control of up to 64 DALI devices in up to 32 groups ("1-fold" device variant)
82406608 3 / 14 23.01.2024