Residual Risk - Kemper ProfiMaster Manual De Uso

3.5 Residual risk

Even in compliance with all safety provisions the operation of the ProfiMaster device
is associated with the below-described residual risk.
All persons handling with the ProfiMaster device must be aware of residual risk and
follow the instructions to prevent accidents or damage as a result of residual risk.
CAUTION
There is a risk of severe damage to the respiratory organs and
respiratory system - use the protection of respiratory system,
such as KEMPER autoflow XP or a respiratory mask with FFP2
class filter according to EN 149 standard.
Skin contact with welding smoke, etc. can result in irritation in
sensitive individuals – wear protective clothing.
Before you proceed with welding ensure proper extraction arm
and extraction nozzle setting, make sure all filter elements are
complete and undamaged and the unit is in operation! Only if the
green ring on the device button is lit, the device guarantees
suction of sufficient volume flow to capture welding fumes.
Replacing the filter elements may result in skin contact with the
separated dust and the work may be associated with dust
swirling. Therefore, it is necessary to use respiratory protection
and protective clothing.
Nests of glowing particles in filter elements can result in a
luminous fire – turn off the filtration device, close the control
valve in the extraction nozzle and let the unit cool under control.
Product number: 150 2464
Technical changes and errors reserved.
KEMPER ProfiMaster Instruction Manual - EN
- 51 - rev.: 2
Status as of: 05/2015