urmet domus BiBus II Manual De Sistema página 32

1) Open the door phone hood.
2) Move jumper W1 from position "a" to position
"b" (see figure 1).
3) Close the door phone hood.
4) Press button 6 (auxiliary service button). The
door phone tone will change each time the
button 6 is pressed. Go to the next step once
the chosen ringer has been selected.
5) Press button 5 (concierge call button). The floor
call tone will change each time the button 5 is
pressed. Go to the next step once the chosen
ringer has been selected.
6) Open the door phone hood.
7) Return jumper W1 to position "a".
8) Close the door phone hood.
32
DOOR PHONE
RINGER TONES AND MUTE FUNCTION
Ref. 1172/35
PERFORMANCE
• Works in 2nd Edition systems only.
• Conversation privacy function (single integrated
decoder).
• Possibility of selecting one of six door phone
ringer tones.
• Possibility of selecting one of six floor call ringer
tones.
• Supplementary speaker for floor call and door
phone call.
• Door opener button.
• Staircase light button.
• Switchboard call button.
• Video bracket control output.
• Visual call in progress signal.
• Door open indication (if service is active).
• "Automatic door opener" function.
• Two-position door unit call volume.
• Ringer mute function with visual indication by
means of LED (slow blinking).
• Supplementary ringer 1072/59 control.
• Configuration function button.
STRUCTURE
The multiple ringer door phone consists of the
following parts:
11 10
VOLUME
12 13
1. Base
2. Hood
3. Call speaker compartment
4. Configuration function button.
WITH MULTIPLE
9
1 2 3
DS1072-021B
8
7
6
5
4