MESTO FERROX PLUS 3585P Instrucciones De Uso página 19

EN
Pressure gage is not
indicating any tank
pressure.
Contact address for additional information → see title page.
Warranty
We guarantee that from the time it is first purchased for a period of the legally valid requi-
red warranty period (maximum 3 years) this device will not exhibit any material or proces-
sing errors. If defects are discovered during the warranty period, MESTO or the distributor
in your country will repair the device without charging for the labor or material or (at the
discretion of MESTO) replace the device itself or its defective parts.
If such defects are discovered, please contact us immediately. We require the invoice or
cash register receipt for purchase of the device.
The warranty does not include wearing parts (seals, O-rings, diaphragm, etc.) or defects,
which have occurred due to improper use or unforeseeable circumstances.
Declaration of Conformity
We, MESTO Spritzenfabrik Ernst Stockburger GmbH, Ludwigsburger Straße 71, D-71691
Freiberg declare under our sole responsibility that the products high-pressure spraying
devices of the series 3565P, 3585P, 3595P, 3615P in the version supplied comply with all
relevant provisions of the Directive 2014/68/EU. Rolf Rehkugler, is authorized to compile
the technical documentation.
Freiberg, 20.12.2017
Bernd Stockburger - Managing Director –
The data and illustrations in these instructions for use are for orientation only and not
binding in any way. The manufacturer reserves the right to make changes or improvements
to the products if these are considered appropriate without having to notify customers
owning a similar model about this fact.
0119
Pressure gage [16] defec-
tive.
Original operating instructions
Sever attachments (at top, at bot-
tom, on right) [26]. (Fig. 24) Open
panel [27], unscrew pressure gage
[16] with wrench and replace. (Fig.
24).
Insert fixing knob [28] (from the spa-
re parts pouch [3]), push to the right
and insert panel [27]. (Fig. 25).
19
ENGLISH
6093720