Publicidad
Idiomas disponibles
Idiomas disponibles
respectively. Then remove the fan cover with the
filter.
2
Clean the fan using a vacuum cleaner or the like.
Notes
• Be careful that the filter does not get caught in the
vacuum cleaner.
• Do not rub the net of the filter roughly.
3
Reset the filter and the fan cover on the side panel
as they were, using the screws loosened in step 1.
Specifications
Power requirements
100 to 120 V AC, 50/60 Hz
(for 100 to 120 V AC users)
220 to 240 V AC, 50/60 Hz
(for 220 to 240 V AC users)
Input current
2.9 A (for 100 to 120 V AC users)
1.3 A (for 220 to 240 V AC users)
Operating temperature
10°C to 30°C (50°F to 86°F)
Operating humidity
20% to 80% (no condensation allowed)
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20°C to +60°C (–4°F to +140°F)
Storage and transport humidity
20% to 90% (no condensation allowed)
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions
About 412 × 210 × 431 mm (w/h/d)
(16 3/8 × 8 3/8 × 17 inches)
Mass
Approx. 15.5 kg (34 lb 3 oz)
Printing system Thermal printing
Thermal head
2,560 elements, 11.8 dot/mm (300dpi)
Gradations
512 levels
Maximum print size
232.2 × 196.4 mm
Picture elements
2,743 × 2,320 dots (w/h)
Printing time
Approx. 40 seconds
Interface
PARALLEL DATA (IEEE1284) × 1,
(Amphenole 36-pin connector)
Special connector × 1
a) Currently, this connector is not used. It is
reserved for future use.
Accessories supplied
Paper tray (1)
Thermal Head Cleaning Kit (1)
Cleaning sheets (2)
Tray guide cover (1)
AC power cord (1)
Connecting cable (1)
Floppy disk (1)
Operation Guide (1)
CD-ROM (1)
Warranty card (1) (for the customers in
the U.S.A and Canada)
Service Contact List (1)
b) When you use the printer in the U.S.A. or
Canada, use the AC power cord supplied.
When you use the printer in a country
other than the U.S.A. or Canada, use the
proper AC power cord for your local
power system.
a)
b)
11
Specifications
Publicidad
