Sony UP-D72XR Guía De Utilización página 28

Accessories supplied separately
Blue Thermal Film Printing Pack
UPT-735BL
Thermal Paper Printing Pack UPP-725
Do not re-use
Doing so may result in malfunction and
negatively affect printing results.
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water: Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with
air or with oxygen or nitrous oxide:
Not suitable for use in the presence
of a flammable anesthetic mixture
with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
Design and specifications are subject to change without
notice.
12
Messages
Messages
There are two kinds of messages; error messages and
warning messages. This section lists these messages
together with their possible causes and remedies. Note
the messages and act accordingly.
Besides error and warning messages, other messages
stating the operating status of the printer are also
displayed. Those messages are not described here.
Error Messages
If a problem occurs, the ALARM indicator lights and an
error message stating the problem appears on the printer
window display. Note the message and perform
whatever action is necessary to solve the problem.
Error messages Possible causes and remedies
CHECK PAPER AND The paper may be jammed.
a)
tRemove jammed paper from the
PUSH [EXEC]
printer, if there is any. Ensure that
no paper has jammed, then press
the EXEC button (page 13).
CLOSE DOOR The maintenance door is open.
tClose the maintenance door
(page 10).
MECHA TROUBLE Mechanical trouble has occurred in the
printer.
tTurn off the power once and then
turn it on. If the message still
remains on the printer window
display, turn off the power
immediately and contact your Sony
dealer.
NO IMAGE DATA No image data is stored in the printer
memory.
tTransfer the image data from your
computer.
REMOVE When printing, the cleaning sheet was
CLEANING SHEET recognized.
tRemove the cleaning sheet, and
then load the paper. To clean the
thermal head or roller, open the
CLEANING menu so that the
printer enters the cleaning mode.
(page 9)
REMOVE PAPER • The paper has jammed.
a)
tRemove jammed paper from the
AND PUSH [EXEC]
• The image transferred may be
printed on the wrong side of the
paper.
tLoad the paper in the paper tray
printer and press the EXEC
button (page 13).
correctly.