Connecting Cord; Using The Backpack Battery - Stihl AR 1000 Manual De Instrucciones

5 IMPORTANT SAFETY INSTRUCTIONS
5.3

Connecting Cord

WARNING
￭ Using a damaged connecting cord may result in fire,
electric shock and other personal injury or property
damage. To reduce these risks:
– Check the battery's connecting cord regularly for
damage. If it becomes damaged, immediately
disconnect it from the power tool and battery. Never
use a damaged connecting cord.
– Do not abrade, crush, jerk, or otherwise abuse or
misuse the connecting cord. Protect it from heat, oil
and sharp edges.
– If the connecting cord becomes damaged, have it
replaced by an authorized STIHL servicing dealer
before use. A damaged connecting cord must be
replaced with an identical STIHL replacement part.
– Unplug the backpack battery from the power tool
when not in use.
– Never yank or jerk the connecting cord to
disconnect. To unplug the connecting cord from the
backpack battery, grasp the battery-side plug, not
the connecting cord.
– Make sure the connecting cord is positioned and
secured so that it will not be stepped on, tripped
over, come in contact with sharp objects, moving
parts, or otherwise be subjected to damage or
stress.
– Check the AP Adapter, the connecting cord and its
plugs for signs of damage. Never use a damaged AP
Adapter, connecting cord or plug.
– Make sure the insulation of the connecting cord and
plugs are in good condition.
– Straighten a twisted connecting cord before use.
– Position the connecting cord so that it cannot be
reached or damaged by the cutting or working
attachment of the power tool being used.
0458-794-8621-C
– Do not use the connecting cord for any purpose
other than providing an electrical connection
between the battery and your authorized STIHL
power tool. For example, do not use it for carrying or
hanging up the battery or power tool.
￭
￭ The two ends of the connecting cord are different shapes
and use different electrical contacts. The battery-side plug
is designed to be inserted into the backpack battery
socket. The plug on the other end is to be inserted into an
AP Adapter or STIHL power tool with an integrated socket.
To reduce the risk of electric shock and damage to the
battery and connecting cord:
– Never attempt to insert the wrong end of the
connecting cord in the battery socket, AP Adapter or
power tool (see illustration).
5.4

Using the Backpack Battery

WARNING
￭ Misuse may result in personal injury and property
damage.
– Use the battery only as described in this instruction
manual.
– Never modify the backpack battery in any way.
– Use only accessories specifically authorized by
STIHL for use with this backpack battery.
– Use the battery only with the harness supplied. It
must not be combined with any other carrying straps.
English
7