Putting On The Harness - Stihl AR 1000 Manual De Instrucciones

English
with the cutting attachment or catching on objects, which
could cause you to lose balance or control of the power tool,
resulting in serious personal injury and property damage.
The connecting cord can be secured in different positions
and adjusted to suit the height and reach of the operator.
A
1
1
1
The connecting cord can run through the guide on the
shoulder strap (Ill. A), or along the back plate (Ill. B). Secure
the connecting cord to the backpack frame with the hook and
eye fasteners (1). Always secure the connecting cord using
the guide or hook and eye fasteners on the side of the body
on which the power tool is held and controlled. Do not allow
the connecting cord to swing across your body or hang at
your side.
C
The length of the connecting cord can be adjusted by
making a loop around the top (Ill. C) or on the side (Ill. D) of
the backpack battery with the hook and eye fasteners.
14
B
1
1
1
D
► Always position and secure the connecting cord so that it
will not interfere with proper working technique or your
ability to maintain control of the power tool.

11.2 Putting on the Harness

WARNING
The operator must be able to remove the backpack battery
quickly in the event of an emergency. In an emergency,
open and remove the waist belt and chest strap quickly
before dropping the battery to the ground.
To ensure a proper fit:
► Put the backpack battery on your back.
► Fasten and adjust the waist belt (2) so that it rests
comfortably but securely on your hips.
► Fasten the chest strap (1) and adjust it so that it fits
comfortably but securely across your chest.
11 Adjusting the Backpack Battery
1
0458-794-8621-C