Beurer BM 45 Manual De Instrucciones página 41

Technical specifications are subject to change without notifi-
cation to allow for updates.
• This device conforms with the European stand-
ard EN 60601-1-2 (in accordance with CISPR-11,
IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-7, IEC 61000-4-8,
IEC 61000-4-11) and is subject to particular precautions
with regard to electromagnetic compatibility. Please note
that portable and mobile HF communication systems
may interfere with this unit.
• The device complies with Regulation (EU) 2017/745 of
the European Parliament and of the Council for medi-
cal devices as well as the respective national regulations
and the standard IEC 80601-2-30 (Medical electrical
equipment Part 2-30 – Particular requirements for basic
safety and essential performance of automated non-in-
vasive sphygmomanometers).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If the device is used for commercial medical
purposes, it must be regularly tested for accuracy by ap-
propriate means. Precise instructions for checking accu-
racy may be requested from the service address.
Mains part
Model no. LXCP12-006060BEH
Input 100 – 240 V, 50 – 60 Hz, 0.5 A max
Output 6 V DC, 600 mA, in conjunction with Beurer
blood pressure monitors only
Manufacturer Shenzhen Longxc Power Supply Co., Ltd.
Protection This device is double protected and has a
primary-side cutout switch which discon-
nects the device from the mains in case of
malfunction.
Ensure that you have removed the batteries
from the battery compartment before you
use the mains part.
Polarity of the DC voltage connection
Insulated/protection class 2
41