Publicidad
Idiomas disponibles
Idiomas disponibles
Installation procedure
1. Attach the wheels (a) to the axle shaft (b) with the
washers (c) and the cotter pins (d).
c
a
2. Lift the machine to a comfortable height to attach the
axle shaft and mounting plates. See Lifting the
machine.
3. Attach the axle shaft to the bottom-right crossbar (e)
with four M8 x 16 bolts (f) (see graphic wc_gr015292)
and four M8 nuts (g).
Continued from the previous page.
d
b
f
wc_gr015292
g
e
wc_gr015293
This procedure continues on the next page.
4. Attach the two mounting plates (h) to the bottom-left
crossbar (j) using eight M8 x 16 bolts (k) and eight
M8 nuts (m).
m
k
5. Clear the area around the machine and carefully
lower the machine to the ground.
6. Attach the right handlebar (n) to the top-right
corner (o) of the frame with three M8 x 20 bolts (p).
p
q
7. Attach the left handlebar (q) to the top-left corner (r)
of the frame with three M8 x 20 bolts (p).
54
h
wc_gr015294
r
n
wc_gr015295
wc_tx004652en.fm
j
o
Publicidad
