Makita XLC11 Manual De Instrucciones página 13

High performance filter
1.
Disassemble the cyclone unit from the cleaner body.
2. Hold the mounting end of high performance filter
and pull it apart from the cleaner body.
Fig.26
► 1 . High performance filter 2. Cleaner body
3. Wipe and shake dust off the high performance filter by hand.
Fig.27
4.
Wash the high performance filter in soapy water
when it is clogged with dust and dirt. Dry it out thor-
oughly in the shade before use.
Fig.28
NOTE: Avoid fastening the attachment end (rubber
sealing ring) of high performance filter when hanging
it up for drying.
1
2
13 ENGLISH
5. Hold the mounting end of high performance filter
and squeeze it back into the cleaner body.
Fig.29
► 1 . High performance filter 2. Cleaner body
HEPA filter
Optional accessory
NOTICE:
Do not rub or scratch the HEPA filter
with hard objects such as a brush and a paddle.
1.
Disassemble the cyclone unit from the cleaner
body.
2. Hold the mounting end of HEPA filter (covered with
high performance prefilter) and pull it apart from the
cleaner body.
Fig.30
► 1 . HEPA filter (covered with high performance prefil-
ter) 2. Cleaner body
3.
Disassemble the high performance prefilter from
the HEPA filter by hand twisting.
Fig.31
► 1 . High performance prefilter 2. HEPA filter
1
2
1
2
1 2