Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Reinstall OUTER WASHER and tighten BLADE
STUD finger tight. The face of upper guard
has marks around it that will help you properly
adjust the blade stud. Press lock button to lock
shaft and TIGHTEN BLADE STUD COUNTER-
CLOCKWISE TWO MARKS ON UPPER GUARD
WITH THE WRENCH PROVIDED.
Do not use wrenches with longer handles, since it
may lead to over tightening of the blade stud.
▼
VARI-TORQUE CLUTCH
This clutching action is provided by the friction
of the OUTER WASHER against the BLADE and
permits the blade shaft to turn when the blade
encounters excessive resistance. When the BLADE
STUD is properly tightened (as described in No. 5
of Attaching The Blade), the blade will slip when
it encounters ex cessive resistance, thus reducing
saw's tendency to KICKBACK.
One setting may not be sufficient for cutting
all materials. If ex cessive blade slippage
occurs, tighten the blade stud one mark more.
OVERTIGHTENING THE BLADE STUD NULLIFIES
THE EFFECTIVENESS OF THE CLUTCH.
Fig. 3
Assembly
▶ Dust Extraction
dust port adapter and vacuum hose so that it
does not interfere with the lower guard, or the
cutting operation at all settings.
▼ DUST PORT ADAPTER
(Sold separately)
Attach the dust port adapter to the foot of the tool
with screw as shown in Fig. 3.
▼ CONNECTION TO VACUUM CLEANER / DUST
EXTRACTOR
Connect the vacuum cleaner hose to the dust port
adapter (Fig. 3).
-
Bosch VH-series hoses - The VX120 hose
adapter is required (included with VH-series
hoses).
-
Other 35mm and 22mm hoses, such as the
Bosch VAC-series hoses - Connect hose directly
to the tool.
-
Common 1/ 4 " or 11/2" hoses - The Bosch VAC024
adapter is required (included).
Connect the vacuum hose to a vacuum cleaner.
The vacuum cleaner must be suitable for the
material being worked on.
When vacuuming dry dust that is especially
detrimental to health or carcinogenic, use a
special vacuum cleaner / dust extractor.
BOSCH VH-SERIES
HOSE
VX120
DUST PORT
ADAPTER
SCREW
-11-
To reduce the risk of
injury, always position
35mm HOSE
1-1/4" or
1-1/2" HOSE
VAC024
Publicidad
