GreenWorks LMC403 Manual Del Operario página 5

EN
1 DESCRIPTION
1.1 PURPOSE
This machine is used for domestic lawn mowing. The
cutting blade must be approximately parallel to the
ground. All four wheels must touch the ground while you
mow.
1.2 OVERVIEW
Figure 1~12
Bail switch
1
Start button
2
Upper handle
3
Lower handle
4
Bolt
5
Height adjustment lever
6
Battery door
7
Knob
8
Grass catcher
9
Handle knob
10
Rear discharge door
11
Door rod
12
Grass catcher handle
13
Hook
14
Mulch plug
15
Side discharge chute
16
Mulch plug handle
17
Side discharge door
18
Pivot
19
Recesses
20
Safety key
21
Battery release button
22
Battery pack
23
Blade
24
Wood
25
Wrench
26
Spacer
27
Mounting screw
28
2 SAFETY
Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
WARNING
English
3 INSTALLATION
Do not change or make accessories that are not
recommended by the manufacturer.
Do not put in the safety key or the battery pack until
you assemble all the parts.
3.1 UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
3.2 UNFOLD THE LOWER HANDLE
Figure 2
1. Pull and turn the handle knobs 90°.
2. Unfold the lower handle.
3. Line up the handle knobs in one of the three
positions on the brackets.
4. Turn the handle knobs 90° until they engage the
holes in the brackets.
Make sure that the two handle knobs are in the same
position.
Do not make damage to the cables when you fold or
unfold the handle.
3.3 INSTALL THE UPPER HANDLE
Figure 3
4
WARNING
WARNING
WARNING
WARNING
NOTE
WARNING