Publicidad
Idiomas disponibles
Idiomas disponibles
2. PREPARE THE INSTALLATION
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
Make sure that the following items are included:
- Hood
- Accessories
• Decorative flue assembly (lower and upper flues)
• Hood mounting bracket (taped inside the hood)
• Upper flue mounting bracket (taped inside the hood)
• 2 hybrid filters
• 3¼" x 10" adapter/damper (for horizontal or vertical discharge) taped inside the decorative flue
• Bag of parts (taped inside the hood) including: 5 no. 8 x 1½" countersunk screws, 8 no. 8 x 3/4" screws,
Parts sold separately:
- Duct, elbows, wall or roof caps.
- Optional flue extension for 10-ft. ceilings model AEWCB3SB (stainless steel) or AEWCB3BLS (black stainless steel).
- Glass panel for WCB3I30SBN and WCB3I36SBN models (see service parts list on page 15).
NOTE: During installation, protect countertop and/or cooktop.
3. SELECT INSTALLATION TYPE
Refer to illustrations below to locate duct opening according to discharge type chosen (grey parts to be installed later).
H
ORIZONTAL DISCHARGE
1
5
⁄
"
8
30"
WIDTH HOOD
HK0059A
36"
WIDTH HOOD
4. REMOVE HYBRID FILTERS
Lay the back of the hood on a table. Use a piece of cardboard to avoid damaging the table or
the hood. Remove tape on filters. Remove filters by pushing them down and flipping downwards.
Set the filters aside.
!
C L
9¾"
11"
3
3
⁄
"
16
14
⁄
"
15
16
17
15
⁄
"
16
WARNING
6 no. 8 x 3/8" screws, 6 drywall anchors, 3 washers,
2 no. 8 x 1/2" screws, 2 no. 8 x 1/2" quadrex black screws,
2 foam squares. If need be, discard extra hardware.
V
ERTICAL DISCHARGE
HK0060A
5
C L
30"
14
15
⁄
"
WIDTH HOOD
16
36"
17
15
⁄
"
WIDTH HOOD
16
7/8"
3
⁄
"
3
16
9¾"
HO0250
Publicidad
