Publicidad
Idiomas disponibles
Idiomas disponibles
Operating this unit
Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3
Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL to switch between the
functions in the following order:
BSM (best stations memory)—Regional (re-
gional)—Local (local seek tuning)—
PTY search (program type selection)—
Traffic Announce (traffic announcement
standby)—Alternative FREQ (alternative fre-
quencies search)—News interrupt (news
program interruption)
# You can also select the function by pressing
FUNCTION on the remote control.
# If MW/LW band is selected, you can only se-
lect BSM or Local.
# To return to the frequency display, press
BAND.
# If you do not operate functions within about
30 seconds, the display is automatically returned
to the ordinary display.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under 1 to 6 on the remote control
and once stored there you can tune in to those
frequencies with the touch of a button.
! Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using 1 to 6 on the remote con-
trol.
1
Use MULTI-CONTROL to select BSM in
the function menu.
2
Press MULTI-CONTROL to turn BSM on.
Six strongest broadcast frequencies will be
stored in the order of their signal strength.
# To cancel the storage process, press
MULTI-CONTROL again.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Use MULTI-CONTROL to select Local in
the function menu.
2
Press MULTI-CONTROL to turn local
seek tuning on.
# To turn local seek tuning off, press
MULTI-CONTROL again.
3
Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for MW/LW:
FM: Level 1—Level 2—Level 3—Level 4
MW/LW: Level 1—Level 2
The Level 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Selecting alternative frequencies
When the tuner can't get good reception, the
unit automatically search for a different sta-
tion in a same network.
1
Use MULTI-CONTROL to select
Alternative FREQ in the function menu.
Section
02
13
En
Publicidad
