Section
03
Available accessories
ITS memo
TitleInput "A"
Notes
! If you select other discs during repeat play,
the repeat play range changes to Disc repeat.
! During video CD or CD playback, if you per-
form track search or fast forward/reverse dur-
ing Track repeat, the repeat play range
changes to Disc repeat.
! During compressed audio playback, if you se-
lect another folder during repeat play, the re-
peat play range changes to Disc repeat.
! During compressed audio playback, if you per-
form track search or fast forward/reverse dur-
ing Track repeat, the repeat play range
changes to Folder repeat.
! When using this unit with multi-DVD player,
you can switch to ITS play mode, ITS memo
and disc title input.
! The ITS function of a DVD player differs
slightly from ITS playback with a multi-CD
player. With multi-DVD player, ITS playback ap-
plies only to the CD playing. For details, refer
to Using ITS playlists on page 54.
58
En
Refer to Using ITS playlists on
page 54.
Refer to Entering disc titles on
page 20.
TV tuner
Basic Operations
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuner's operation manual. This section pro-
vides information on TV operations with this
unit which differs from that described in the
TV tuner's operation manual.
1 1 1 1
1 Band indicator
2 Preset number indicator
3 Channel indicator
1
Press SOURCE to select the TV.
2
Press BAND to select a band.
Press BAND until the desired band is dis-
played, TV-1 or TV-2.
3
To perform manual tuning, push
MULTI-CONTROL left or right.
4
To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can skip broadcasting channels. Seek
tuning starts as soon as you release
MULTI-CONTROL.
2 2 2 2
3 3 3