Össur ICELOCK 551 Instrucciones Para El Uso página 6

Disassembly
1. Unscrew the Cap using the Cap Key.
2. Remove the Rubber Membrane carefully.
3. Clean all parts with water and mild detergent.
4. Hold down the release button while cleaning airways.
Reassembly
1. Replace Rubber Membrane to Cap. Ensure the concave surface is
facing the cap cavity (Fig. 4).
2. Screw the Cap on using the Cap Key.
Caution: When reassembling ensure the Membrane is on the Cap and not
in the Housing.
REPORT OF SERIOUS INCIDENT
Any serious incident in relation to the device must be reported to the
manufacturer and relevant authorities.
DISPOSAL
The device and packaging must be disposed of in accordance with
respective local or national environmental regulations.
LIABILITY
Össur does not assume liability for the following:
• Device not maintained as instructed by the instructions for use.
• Device assembled with components from other manufacturers.
• Device used outside of recommended use condition, application, or
environment.
6