Descargar Imprimir esta página

cecotec CONGA FLASH CONNECTED ULTIMATE Manual De Instrucciones página 42

Robot aspirador

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
ENGLISH
5.
Place the robot on the charging base and make sure the charging terminals on the
robot match those of the charging base. Once the robot is properly placed, it will beep
once and the power button will light up. If the light is oscillating orange, it means the
battery is not completely charged. To ensure maximum cleaning time, wait until the light
switches to steady blue. This will indicate the battery is fully charged and the robot is
ready to clean. Fig. 18
4. OPERATION
Starting the cleaning. Fig. 19
Hold down the Start/Pause button on the robot to turn it on.
Press the Start/Pause button on the robot vacuum cleaner or on the app to start cleaning.
Note
-
If the robot runs out of battery while cleaning, it will automatically return to the charging
base. Once the battery is fully charged, the robot can start a new cleaning cycle.
-
If there is no good access to the charging base, the robot will not be able to return to it. If
this happens, place it manually on the charging base.
Pausing the cleaning. Fig.
Press the Start/Pause button on the robot vacuum cleaner or on the app to pause the
cleaning process.
Press the Start/Pause button on the robot vacuum cleaner or on the app to resume the
cleaning process.
Off. Fig.
19
Hold down the Start/Pause button on the robot to turn it off.
Warning
The robot vacuum cleaner has a power switch (with positions I and 0) located on the lower
part of the main body. If the robot will not be used for long periods of time, it is recommended
to turn it off using this switch. As a safety measure, if the robot is switched off (0 position),
it will restore the factory default settings. To operate the robot, the switch must be in the on
position (I)
Cleaning modes
This robot includes different modes and functions that can be activated via the app.
Auto mode. Fig.
19
-
Press the Start/Pause button or select the auto cleaning mode on the app, then the robot
vacuum cleaner will start the automatic cleaning.
42
19

Publicidad

loading

Este manual también es adecuado para:

05795