Publicidad
Idiomas disponibles
Idiomas disponibles
•
Hold the product on the right side of your
body.
•
Keep the cutting attachment below waist
level.
•
Keep body parts away from the hot
surfaces.
•
Keep body parts away from the cutting
attachment.
Before you operate the product
•
Examine the work area to make sure that
you know the type of terrain, the slope of
the ground and if there are obstacles such
as stones, branches and ditches.
•
Do an overhaul inspection of the product.
•
Do the safety inspections, maintenance
and servicing that are given in this manual.
•
Make sure that all covers, guards, handles
and accessories are correctly attached and
not damaged.
To start the product
1. Put the product in the start position.
2. Push and hold the power button until the
green LED comes on.
3. Use the power trigger to control the speed.
Speed mode function
You can use the product in 3 speed modes.
•
Eco mode: On the speed mode display
1 LED comes on when you operate the
product. Use the eco mode for easier tasks
and to extend the battery life.
•
Normal mode: On the speed mode display
2 LEDs come on when you operate the
product. Normal mode is applicable for
most tasks. The product is set to the
normal mode when started.
•
Boost mode: On the speed mode display
all 3 LEDs come on when you operate
2094 - 004 - 03.11.2023
the product. Use the boost mode for tasks
where more force is necessary.
Note:
If you release the power trigger, the
product sets to the last speed mode when
you start it again. If the product automatically
stops, the product sets to normal mode when
you start it again.
To select a speed mode
You can set necessary speed mode when you
operate the product.
•
Push the speed mode button until the
correct speed mode is selected. The LEDs
come on, refer to
page 13 .
Automatic shutdown function
The product has an automatic shutdown
function that stops the product if the product
is not used. The green LED for start/stop
indication goes off and the product stops after
120 seconds.
To stop the product
1. Release the power trigger or the power
trigger lockout.
2. Push the power button.
Speed mode function on
13
Publicidad
