Ingersoll Rand BMDS2 Manual De Uso página 5

NOTE: the balancer stops even if the drum spring is fully discharged; to restore operation, try and load the spring as described
in the "Balancer adjustment" paragraph. If the balancer does not release DO NOT intervene of your own initiative but contact the
after-sales assistance service at once.
M
AIntenAnce
Maintenance may be carried out only by skilled and authorized personnel.
Use original INGERSOLL-RAND spare parts only. When requesting spare parts, the Customer should kindly contact the supplier of
the balancer or the manufacturer directly, specifying the equipment's identification data printed on the plate.
Do not make any modification to the rope group and, specifically, DO NOT SHORTEN the rope: if needed, please get in touch with
the supplier or the manufacturer directly.
Never disassemble the balancer. Maintenance is to be carried out only by skilled, authorized personnel.
W
ArrAnty
The use of non-original INGERSOLL-RAND spare parts will negatively affect safety and performance and, in any case, it will void
the warranty.
The rope and the drum-spring are not covered by warranty.
D
IsposAl
At the end of the work life of the balancer, proceed as follows:
- Rewind the rope completely
- Unhook the load from the balancer
- Unhook the balancer from the primary and safety connections.
- Proceed to fully discharge the balancer spring.
Once the balancer has been discharged, it must be disposed of complying with the rules and regulations in force.
5
EN