HOLZMANN MASCHINEN HBS 700 Manual De Instrucciones página 31

12 SAFETY
12.1 Intended Use
The machine bevel bandsaw is designed for performing cuts into suitable materials under the
premise to use the correct combination of bandsaw speed and feed rate.
The intended use incorporates sufficient knowledge of the operator regarding the work with wood
bandsaw and regarding accident prevention rules, sufficient material knowledge as well as
sufficient and productive maintenance of the machine.
Any manipulation of the machine or its parts is a missuse, in this case HOLZMANN-MASCHINEN
and its sales partners cannot be made liable for ANY direct or indirect damage.
It is imperative to obey all safety rules as well as assembly, operation and maintenance in-
structions to keep alive your guarantee rights.
12.1.1 Ambient conditons
The machine may be operated:
humidity
temperature
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion
hazard.
12.1.2 Prohibited use
 The operation of the machine outside the stated technical limits described in this
manual is forbidden.
 Operation of the machine function without emergency stop button or impeller box
with open doors is prohibited.
 The use of saw bands not according with the required dimensions is forbidden.
 The use of saw bands not being suitable for the use of the machine and not being
certified is forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in 12.1 is forbidden.
 The unattended operation on the machine during the cutting process is forbidden!
It is not allowed to leave the immediate work area during the cut is being
performed.
HOLZMANN MASCHINEN GmbH
Use only saw blades allowable for this machine!

Never use a damaged band saw blade!

Use the bandsaw never with defective or without mounted guard

www.holzmann-maschinen.at
HOLZBANDSÄGE / MWOOD BAND SAW / SIERRA DE CINTA / SCIE À RUBAN
W A R N I N G
HIGHEST RISK OF INJURY!
max. 70%
+5°С to +40°С (+41°F to +104°F)
SAFETY
Seite 31
HBS 700 – HBS 800