Publicidad
Idiomas disponibles
Idiomas disponibles
Fuel and Compression Pressure Test Gauges Set
SPECIFICATION
Spark plug sizes: 8, 10, 12, 14 mm
Spark plug thread sizes: M8, M10, M12, M14
Hose lengths: 220 mm
Burst pressure of hoses: 60 bar
Fuel connector sizes: Ø 6.4 / Ø 7.9 mm
COMPONENTS
1
Fuel connector for fuel pressure test 7.9 mm
2
Compression test hose M14x1.25
3
Fuel connector for fuel pressure test 6.4 mm
4
Fuel pressure gauge, pressure scale up to 7 bar (100 psi)
5
Compression pressure gauge, pressure scale up to 2000 kPa (300 psi)
6
Fuel pressure gauge, pressure scale up to 1 bar (100 kPa)
7
T-Adaptor for fuel pressure test 7.9 mm
8
T-Adaptor for fuel pressure test 6.4 mm
9
Compression test adaptor M12x1.25
10 Compression test adaptor M10x1
11 Compression test adaptor M8x1.25
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This set of three gauges with connectors and adaptors is used for testing compression and fuel
pressure on motorcycles. Gauges range from 0-300 psi (0-2000 kPa) for compression testing, 0-7 bar
(0-100 psi) for fuel pressure and 0-1 bar (0-100 kPa) for low pressure fuel.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 74355
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
