Publicidad
Idiomas disponibles
Idiomas disponibles
mode; remove the food, let the appliance cool down, preferably with the drawer
extracted, before proceeding with cleaning.
After a short period of inactivity, even if connected to the electrical socket, the
appliance will be completely switched off, excepted for the red light
stand-by mode, press the icon [ ]; the buttons light up and the display shows
alternately the preset temperature of 180° C (icon [°C] on ) and the preset cooking
time of 15 mins (icon [MIN] on). It is now necessary to program the cooking parameters
and start the process.
It is possible to select one of the 9 preset programs for cooking the most common
foods according to specific parameters for each type of food, or select a free cooking
program, with cooking temperature and duration that can be personalized according
to one's experience or desire.
Remove the drawer from its place, then put the food inside, paying attention to:
Ensure the presence, on the bottom of the container, of the fat separating
grid, which allows healthier and more uniform cooking and prevents the
formation of smokes and bad smells.
Avoid overloading the container, especially in height, to prevent contact with
the heating element.
Arrange the food evenly spaced on the surface of the container, to avoid
uneven cooking.
Reinsert the drawer completely into its seat, until it clicks, then the control
panel will light up.
PRESET PROGRAMS
To start one of the 9 pre-set programs, touch the corresponding icon: the icon will
flash and the specific temperature and cooking duration information will be shown
alternately on the display. At this moment, if you want to customize the pre-set
program, you can change the pre-set programs in terms of temperature (icons [O]) and
duration (icons [K]). To start cooking, touch the [
It is possible to select a preset program among the following:
Icon
Program
Preheating
French fries
25
] icon.
Temperature
180° C
200° C
. To switch to
Duration
3 min
18 min
Publicidad
