Descargar Imprimir esta página

cecotec SURFACE PRECISION 970 SMART HEALTHY Manual De Instrucciones página 36

Báscula de baño digital

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1.
1. Display
2. Right-foot contact area
3. Left-foot contact area
4. High-precision sensors
5. Battery-compartment cover
6. Body measuring tape
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
-
Take the appliance out of the box. Check carefully if there is any damage. If there is,
immediately notify the official Cecotec Technical Support Service.
-
Remove the protective strip from the battery compartment, located on the bottom part
of the appliance in order to activate the latter. This protective strip is placed for a more
secure transportation.
Further information
-
Weight yourself without any clothing and barefoot.
-
It is suggested to weigh yourself at the same time and always under the same
circumstances.
-
Measured values might be distorted if weight is measured immediately after doing sport
or if you have not eaten or drunk enough over the day.
-
Measurement of body fat, water content and muscle and bone mass are only possible
with bare and dry feet.
-
The scale reacts to a minimum weight of 5 kg and rounds up weight to whole 100 g.
-
Measuring surface must be clean in order to work properly.
36
SURFACE PRECISION 970 SMART HEALTHY

Publicidad

loading

Este manual también es adecuado para:

04404