cecotec BOLERO AGUAZERO 4101 FULL-BI E Manual De Instrucciones página 97

Follow these steps when there are foreign materials in the dishwasher
WARNING!
Never use a spray cleaner to clean the door panel, as this may damage the door opening
-
and closing system and electrical components. The use of abrasive agents is not
permitted because of the risk of scratching or staining the surface of the dishwasher.
Keeping your dishwasher in good condition
After every wash
After every wash, close the device water supply and leave the door slightly open for some
-
minutes so moisture and odours are not trapped in the interior.
Disconnecting the plug
Always remove the mains plug from the socket before cleaning or performing any
-
maintenance. Do not take risks.
Do not use solvents or abrasive cleaners to clean the exterior and rubber parts of the
-
dishwasher. Only use a cloth with lukewarm water and neutral soap. To remove stains
from the interior surface, use a cloth dampened with water and a little vinegar, or a
cleaning product specifically for dishwashers.
When the dishwasher is not going to be used for a long period of time:
-
When going on holiday, it is recommended to run a wash cycle with the dishwasher
-
empty and then unplug it from the power socket. Turn off the water supply and leave the
door slightly ajar. This will help preserve the door gaskets for more time and will prevent
odours forming inside the device.
Moving the appliance
If you want to move the device, try to do so in an upright position. If absolutely necessary, you
can place it on its back.
Gaskets
One of the factors that cause odours to form in the dishwasher is food trapped in the gaskets.
Regular cleaning with a damp sponge will prevent this from happening.
Warning
Danger of electric shock. Disconnect the power supply before installing the dishwasher.
Otherwise, this may cause an electric shock resulting in serious injury or even death.
BOLERO AGUAZERO 4101 FULL-BI E
ENGLISH
97