Descargar Imprimir esta página

cecotec BOLERO AGUAZERO 4101 FULL-BI E Manual De Instrucciones página 99

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
4.- Skirting board
NOTE: the following table shows the different skirting boards heights required, depending on
the needs in terms of aesthetics and door opening and closing.
OPTION
1
2
3
4
5
6
Choose an option and follow the indicated measurements to ensure that the door can be
opened and closed without difficulty and that there is no gap between the decorative panel
and the skirting board.
1.1 Levelling of the device
The angle of inclination must not exceed 2 degrees. Adjust the height by turning the legs to
ensure that the dishwasher is level.
Fig. 29 key:
1.- Adjustment of the front legs
2.- Adjustment of the rear legs
1.2 Fixing of the appliance
1.- Fix the dishwasher to the cabinet using the ST4*26 wood screws on the right and left
sides.
2.- Insert the plugs into the 4 holes.
Fig. 30
NOTE:
To connect the water inlet hose, the drain hose, and the power supply cable, follow the
instructions given in the previous sections of the manual.
FULL INTEGRATION
HEIGHT OF
HEIGHT OF
DECORATIVE
THE SKIRTING
PANEL (mm)
BOARD (mm)
708
698
688
678
668
658
SEMI INTEGRATION
HEIGHT OF
DECORATIVE
PANEL (mm)
75
85
95
105
115
125
BOLERO AGUAZERO 4101 FULL-BI E
ENGLISH
HEIGHT OF
THE SKIRTING
BOARD (mm)
593
583
573
563
553
543
75
85
95
105
115
125
99

Publicidad

loading

Este manual también es adecuado para:

02785