Descargar Imprimir esta página

Hatco Palletti IWRM Serie Manual De Instalación Y Operación página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

SPECIFICATIONS
Plug Configurations
Units are supplied from the factory with either an attached
power cord and plug or a detachable power cord and plug,
depending on the unit. Plugs are supplied according to the
application.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.
NOTE: The specification label is located on the bottom of the
unit. See label for serial number and verification of unit
electrical information.
Electrical Rating Chart — Countertop Models
Model
Voltage
IWRM-CD1-05
Electrical Rating Chart — Built-In Models
Model
Voltage
IWRM-B1-1313-05
Watts
220
230
500
240
Watts
220
230
500
240
CEE 7/7 Schuko
AS 3112
NOTE: Receptacle not supplied by Hatco. All units must be
connected to a dedicated circuit.
Amps
Hertz
2.3
2.2
50/60
2.1
Amps
Hertz
2.3
2.1
50/60
2.1
6
BS-1363
CCC-10A
Plug Configurations
Plug Configuration
Shipping Weight
CEE 7/7 Schuko,
BS-1363, AS 3112,
CCC-10A
Plug Configuration
Shipping Weight
CEE 7/7 Schuko,
BS-1363, AS 3112,
CCC-10A
Form No. IWRMCEM-0321
6 kg (12 lbs.)
6 kg (12 lbs.)

Publicidad

loading

Este manual también es adecuado para:

Palletti iwrm-cd1-05Palletti iwrm-b1-1313-05