Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Rotate the front of the appliance up against
cabinet bottom.
3.
Insert a self-aligning screw (item A) through top center
cabinet hole. Temporarily secure the appliance by
turning the screw at least two full turns after the
threads have engaged.
Insert the two remaining self-aligning screws through
4.
outer top cabinet holes. Turn two full turns on each
screw.
Tighten center screw completely.
5.
6.
Tighten the outer two screws completely to the top of
the appliance.
Note: While tightening screws, hold the appliance in
place against the wall and the top cabinet.
12
7.
Install grease filters by sliding them into the side slots,
then pushing up and toward the appliance to
lock (image shows bottom view of appliance).
Publicidad
