Nolan N-Com R Serie Manual De Instrucciones página 54

EN
15. INTERCOM
The N-Com B902 system allows communication with other N-Com systems, up to a maximum
distance of about 700 m (in open field, with no obstacles). The range of the communication varies
depending on the N-Com systems used.
N.B.: The range and quality of the communication may vary significantly depending on the presence
of obstacles, weather conditions, magnetic fields.
15.1. N-Com "600"/"900" Series Intercom pairing up
Important: The procedure described below refers exclusively to the pairing up between the
"600"/"900" series N-Com systems.
•
Make sure the systems are turned off.
•
Put the systems in "Pairing up" menu: press the "ON" key and keep it pressed for 4 seconds, until
you hear the voice announcement "
•
On both systems, press the key "" until you reach the option "
•
On system A, press the key pertaining to the "pre-setting position" where you wish to save
system B.
Pairing up CHANNEL 1
Pairing up CHANNEL 2
Pairing up CHANNEL 3
•
No key must be pressed on system B.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
Through the N-Com EASYSET APP, the "
mode allows the N-Com systems to be recognised and stored through a QR code
generated on one's smartphone.
Intercom Easy Pairing
The
15.2. Pairing up other N-Com
Important: The procedure described here below refers exclusively to the pairing up of "900" series N-
Com systems with N-Com systems OTHER THAN the "600"/"900" series
•
Make sure the systems are turned off.
•
Put B902 system in "Pairing up" menu: press the "ON" key and keep it pressed for 4 seconds, until
you hear the voice announcement "
•
Put the N-Com system in "Setting" mode: press the "ON" key and keep it pressed for 4 seconds,
until the blue LED starts to flash quickly.
•
On B902 system, press the key "" until you reach the option "
•
On B902 system, press the key pertaining to the "pre-setting position" where you wish to save the
other N-Com system.
1
Except for Bluetooth kit and Bluetooth kit2, which are not compatible.
22
Pairing up Menu
".
Briefly press "n".
Press the "n" key twice.
Press the "n" key three times.
Intercom Easy Pairing
function is only available for B902 systems.
Pairing up Menu
".
Intercom pairing
".
" can be carried out. This
1
.
Pairing up other N-Com
".