Rointe D Serie Manual De Instalacion Y Uso página 16

• Open WINDOWS function
This option allows you to activate or deactivate the OPEN WINDOWS function.
Use the and buttons
Once the desired option has been selected, press
• BOOST function (2H)
The 2 hour mode will override any other setting mode and will increase your
product to maximum power. You can choose to increase the maximum power
for 15 minutes, 30 minutes, 1 hour or 2 hours.
To set the 2 hour mode, make sure the icon
submenu and press the
Use the and buttons to choose how long to boost your towel rail and press
to confirm.
• Efective Power function
To check the Power status of your product, make sure the icon
is flashing in the 'Energy' submenu and press the button
access. This option shows on the display the actual consumption
time of the product and the total time during which our product is
connected to the mains. After a few seconds without pressing any
button, the display will show the nominal power and the effective
power of the product. The effective power corresponds to the average
power value that our product actually consumes during operation.
• Information
This option displays the software version, release date and power rating of
the product. It is accessed by selecting the icon
once it is flashing and confirming with
the screen. To exit press the button
next screen in the information function.
Pressing , the screen displays the Wi-Fi connection status, connection
type, IP address, subnet mask and gateway. To exit press
button to return to the next screen in the information function.
16
and , to select ON to activate and OFF to deactivate.
to confirm.
. The information is displayed on
or press the button
to confirm and exit.
is highlighted in the 'Power'
to
in the energy submenu,
to return to the
or press the
WIFI STATUS
dhcp:assigned
IP, NM, GW:
xxx.xxx.x.xxx
xxx.xxx.xxx.x
xxx.xxx.x.xxx