Rointe D Serie Manual De Instalacion Y Uso página 19

• START PROGRAMMING for AUTOMATIC mode
To program the AUTOMATIC mode, look at the above points and make sure
that START PROGRAMMING is selected. Press the button
an illuminated display will appear.
STEP 1 - Select COMFORT mode temperature
The COMFORT mode will be programmed first. Select the COMFORT mode
temperature between 19ºC and 30ºC using the and buttons
icon and temperature will flash. Press
STEP 2- Select ECO mode temperature
ECO mode will be programmed next. Select ECO mode temperature
between 7.5ºC and 18.5ºC . The icon
to confirm.
STEP 3 - Select the day
The days of the week will start flashing on the display and will be shown as
DAY 1, DAY 2, DAY 3, etc.
Use the and buttons to move forward or backward through the days
displayed. Press
AUTOMATIC programme. The day will stop flashing once selected. Repeat
the process for all the days you wish to program and once you have all the
days selected press the button
D SERIES DIGITAL TOWEL RAIL WITH WI-FI
and temperature will flash. Press
to select the day or days you wish to include in your
to move on to setting the time.
to confirm and
and
to confirm.
.The
EN
19