Sub-Zero Designer Serie Guía De Uso Y Mantenimiento página 7

Storage
Refrigerator Storage
GLASS SHELVES
To remove or adjust a glass shelf, tilt up, then lift up and
out. To reposition, insert the shelf in the tracks along the
back wall, then lower the front until it locks into position.
Refer to the illustration below.
IMPORTANT NOTE: Use care when handling glass shelves
to prevent breakage or scratching of the interior.
CAUTION
Warm glass shelves to room temperature before
immersing in warm water.
Glass shelf removal
REFRIGERATOR DRAWER
To remove, pull the refrigerator drawer forward until it
stops. Lift the front of the drawer slightly and pull straight
out. Refer to the illustration below. To reinstall, engage the
drawer into the side rails and slide back into position.
Drawer removal
UPRIGHT BEVERAGE SHELF
Adjustable gates can be raised to keep items snugly in
place. When raised, the distance between the gates is
64 mm. To raise, lift the gate up. For clear shelf space,
lower gates into the recessed areas. Refer to the illustration
below.
To remove, pull the shelf forward until it stops. Lift the front
of the shelf slightly and pull straight out. Refer to the illus-
tration below. To reinstall, engage the shelf into the side
rails and slide back into position.
Upright beverage shelf Upright beverage shelf removal
MULTIPURPOSE SHELF
To remove, pull the shelf forward until it stops. Lift the front
of the shelf slightly and pull straight out. Refer to the illus-
tration below. To reinstall, engage the shelf into the side
rails and slide back into position.
Multipurpose shelf removal
subzero.com | 7