will turn off automatically.
To store photos, videos, and music should insert a micro SD external memory.
1. Carefully remove the back cover;
2. Insert the microSD card keeping the surface with the electrical contacts facing down
(display side);
3. Replace the back cover.
Notes:
• Some card brands may not be compatible with the phone. The use an incompatible
memory may be damaged or the card memory itself.
• The appliance only supports memory formatted in FAT. If you enter formatted cards
differently the phone will ask you to reformat the memory card.
CHARGING THROUGH ADAPTER:
1. With the device off, connect the Type-C socket of the cable supplied to the Type-C socket
of the telephone (16);
2. Connect the USB socket of the same cable to the supplied power supply and connect
the latter to a standard mains socket;
3. The device will turn on and show the battery icon with the recharging phase for a few
seconds. To view the charge level at any time, just press any key on the phone;
4. When the battery is fully charged (the icon will no longer be moving), you can disconnect
the power supply from the mains socket and then disconnect the Type-C plug from the
phone.
Notes:
• Use only the USB/ Type-C cable supplied.
• Only use the supplied power supply, different power supplies could damage the battery
or the device.
• You can also use the device when it is charging, but we do not recommend using it for
longer battery life; moreover, using the appliance, the recharging times are lengthened.
• While recharging the appliance may increase in temperature, this does not affect the
performance and duration of the appliance.
3. Inserting the micro SD card
4. Charging battery
24