Publicidad
Idiomas disponibles
Idiomas disponibles
6. INTERNAL LAYOUT
EN
6.1 Internal Layout
(positioning, adjustment, removal)
Crisper Drawer
Fixed to the slide guides with two thumbscrews.
>
to remove the drawer, unscrew the thumbscrews,
lift slightly at the front and pull forward. Be sure
to support the rear of the drawer when removing.
Fresh Zone Drawer
The upper Fresh Zone can be removed using the same
method used for the crisper drawer. To remove the
inner Fresh Zone drawer unscrew the thumbscrews.
When replacing the drawers, make certain the
back of the drawers engage under the clips on the
slide guides.
Ice Tray
Located in the upper drawer of the freezer com-
partment on some models. There are feet protru-
ding from the bottom of the ice bin that will situate
it correctly in at the back left of the inner FreshZone
drawer. The notch in the ice collection bin should
be at the back.
>
after removal, make sure to reposition it cor-
rectly.
32
Warning
Do not place hands or fingers near the
Icemaker when in operation.
Shelves
The shelves are positioned on the left and right by
two pins engaged in the shelf supports.
To reposition a shelf it is recommended to removed
contents for safety and ease of movement.
>
Lift the shelf slightly and pull towards you to
disengage the pins from the support geometry in
the guides.
>
Slide the shelf to the new position and engage
the support pins in the corresponding regions of
the shelf support guides. Prior to loading the shelf
with goods in the new position, test the positioning
for secure support by applying moderate pressure
down on the top surface with a hand while keeping
the other hand in a supporting position in case the
shelf is not properly seated.
Door Bins adjustment
2
1
Publicidad
